Showerheads are amongst the essential accessories of your bathrooms. Whether you have a handheld showerhead or a wall-mounted, fixed shower head, you need to maintain and clean them either way.
However, you may come across problems like mineral deposit clogging, which can lead to low pressure in your water stream – indicating that it requires a good cleaning session. This becomes more of an issue if you have hard water in your pipes.
Additionally, it can also cause your shower head’s body to become foggy, giving it a more conventional feel rather than a new one. If you notice, the showerhead body will also lose its shine, although you can restore it if you tend to clean it up.
Once you decide to clean it, the next question comes of how to do so. To begin with, there are multiple ways. For instance, conventional cleaning methods include cleaning it with vinegar since it immediately cleans mineral deposits by reacting to them. But it does not end here. You can use other alternatives too.
In this article, today we will speak about how to clean a shower head with bleach, baking soda, and a few other tips to clean shower heads, hose, chrome showerheads, and rubber nozzles – so hang in there, tight!
How To Clean A Shower Head With Bleach?
Apart from being a much more affordable option, bleach is quite accessible for purchase. Alongside this, it is a disinfectant, and hence special precautions need to be taken into consideration. Make sure that you do not use bleach in a non-ventilated room. Subsequently, do not try mixing any other compounds with bleach, as it can negatively affect your well-being.
You can clean your shower head using bleach. Start by mixing water and bleach in equal parts using a bucket or a disposable bowl. Make sure that you do not use this bowl for any food items afterward. You need to ensure the mixture is diluted before using it for your shower head.
Use a cloth to dip in the bleach solution and apply it to the best high-pressure showerheads. Let it stay for the next five minutes, after which you can use water to rinse off your shower head. For a follow-up wash, you can use mild soap with water and allow it to dry.
In case you come across any cloudy residue, it indicates that a part of your bleaching solution husband left behind, which can be disposed of.
How To Clean The Shower Head Without Vinegar?
Showerhead cleaning adds to the lifespan of your product while adding a shine to it. Often people tend to clean shower heads using vinegar, although it leaves behind an unpleasant odor for most people. At times, the use of vinegar can cause a few surfaces’ erosion, which may damage your shower head’s appearance. To avoid such a hassle, you can use different economical methods to clean your shower head without vinegar.
A few alternatives include using Coca-Cola, an oven cleaner, baking soda, and even lemon juice.
Using Coca-Cola as an alternative to clean shower heads without vinegar is a good option.
All you need to do is fill up I’ll polythene bag using Coca-Cola and tie it around your shower head using a rubber band. Make sure that your shower head completely submerges inside the Coca-Cola liquid.
Leave it there for the next 20 minutes, after which you can take off the bag and scrub off your shower head using a brush. Once done, you can rinse your shower head with warm water.
How To Clean Shower Head With Baking Soda?
Besides cleaning your shower head using vinegar, you can also use baking soda as an alternative since it is amongst the most powerful cleaning solutions available. Baking soda is quite famous for wiping off the toughest of stains while leaving your showerheads clean and shiny.
On top of that, it is quite a simple method without overspending on it.
You can begin by cleaning the dirt and debris off your shower head using a sponge or a scrub manually. This step is essential so that no particles come across as you apply the baking soda paste to your shower head.
Make sure that you arrange for a large container like a bowl or a jar, which can fit in your solution as well as your shower head. Next, pour in some warm water along with your baking soda to formulate a paste.
Next, you need to apply this paste on your shower head manually or with a brush. You can do this by either taking off your showerhead or even with it being fixed – whichever seems more convenient for you.
Make sure to put on protective gloves while applying the baking soda on your shower head, as it can cause damage to your skin with a more extended time of contact.
You can leave the solution on for about 15 minutes and then use a rag or a brush to scrape off the dirt from your shower head. This will also ensure stability and cause all the filth to come off. Additionally, make sure that you do not leave the baking soda paste for longer than 15 minutes, as it may become hard to wash it off.
Once all the dirt has been cleared, you can wash it off using water and wipe off any excess lather. You will now have a showerhead that may look as good as new – baking soda will thoroughly remove any dust and limescale present. Ensure that you leave running water after cleaning so that any left behind residues can be washed away.
The best part is that since baking soda is natural, it does not leave behind any side effects.
How To Clean Shower Head Rubber Nozzles?
Cleaning shower head rubber nozzles is quite an easy task. All you need to do is opt for your toothbrush or your finger and rub it on the nozzles. This will let loose all deposits and allow good water flow. Once cleaned, you can then enable running hot water to flow for the next couple of minutes.
How To Clean Shower Head Limescale?
If you wish to clean your shower head limescale, you need to completely submerge your shower head in a vinegar filled bag, dissolving all limescale remains.
To add to your cleaning power, you can mix a few scoops of baking soda to your vinegar solution before you shove your shower head into the polythene bag. They both serve as a natural abrasive, helping release the clogged passages in your shower head. Once done, you can now rinse it off.
Additionally, you can also opt for a limescale remover on your shower head while scrubbing off all the dirt and rinsing it with her training water.
How To Clean The Shower Head And Hose?
This task requires a few steps like dismantling, cleaning, and descaling the removable parts like the hoses and the heads while inserting them back as they fit.
To Clean Hard Deposits
You can opt for a showerhead Plus liquid need. I will make sure the first tested before using it on any chrome fitting.
For Regular And Routine Cleaning
Use one-third of the showerhead plus liquid with two-thirds of water and create a solution. Once done, not follow the below-stated steps:
Step 1
Use the soft brush to manually clean the showerhead and remove any soap scum or loose deposits.
Step 2
Use a large container like a plastic bucket and pour the solution and both head and hose in it. Make sure that both products are fully involved.
Step 3
Allow them to be soaked for the next 15 minutes.
Step 4
Any leftover dirt can be removed by scrubbing it off with a cloth gently.
Step 5
Rinse it with running clean water
Step 6
To ensure cleanliness, you can examine its fittings.
How To Clean A Shower Head With Lemon Juice?
Lemons have an acidic nature and tend to work similarly to vinegar, hence serve as a great cleaning option.
To clean your shower head with lemon juice, you can either buy a lemon juice bottle or squeeze lemons as per your convenience.
Give a soft cloth in the lemon juice and clean your shower head with it. No scrubbing task is required as lemon is acidic will do all the work instead.
For an added shiny appearance, you can add a pinch of salt to your lemon juice solution, mix it thoroughly and clean your shower head with it. Since this solution will be abrasive, it will eliminate all the grime and mildew while bringing back your shower head’s original shine.
Allowed the solution to send for a couple of minutes afterward, you can rent it off. Wipe your shower head and allow it to dry.
How To Clean A Chrome Shower Head?
You can Clean your chrome shower head by using a lemon juice solution. Take a bowl and squeeze half a lemon into it, now, use a cloth and remove all stains from your chrome shower head. You can also use a toothbrush or a sponge as a tool.
Additionally, you can add warm water (half a cup) to the lemon juice for internal cleaning.
Showerhead Cleaning Hacks
- Use a sponge or a scrub to clean and wipe all dry debris visible on the holes.
- Create a solution by mixing water in vinegar together. Submerge your best shower head 2020 in a plastic bag containing the solution.
- Allow your shower head to be completely immersed in the solution, and I am not around it using a rubber band.
- Allow the solution to sit for a minimum of 20 minutes and a maximum of 60 minutes.
- Now you can remove the bag and clean the loosened deposits that are left behind.
Allow running hot water to go through once all of this is done.
Conclusion
Whether or not we are cleaning freaks when it comes to having a clean best handheld shower head. We all long to have a healthy session for bathing and hence the odd for different methods to clean out the showerheads.
No one appreciates those dirt piles that came across your face as you bathe. Hopefully, you can now resolve this dilemma with our easy cleaning solutions and thoroughly clean your showerheads.
Make sure to opt for a solution that is more feasible and convenient for you. Well, time to keep your shower head clean!
Leave a Reply